Welcome to Ultrafilter webshop, log in or create new accountCustomer Center - Log out

DK NO SE EU

Sterilefilter PTFE

PFPT

Ultra-Mem PTFE cartridges are manufactured by means of 1 micron hydrophobic ePTFE membrane.

The improved ePTFE membrane provides exceptionally high flow rates at low differential pressure, making PTFE  cartridges suitable for air/gas filtration.

Ultra-Mem PTFE  cartridges gives a wide range of chemical compatibility with high thermal stability. Suitable for the most demanding microfiltration membranes applications, cartridges are used for filtration of aggressive chemical solutions, including acids, alkalis, solvents and caustics.

 

Element Dimensions (mm)
Element size Length
Diameter
Filtration surface
5" (05/30) 127 70 0,37m2
10" (10/30) 254 70 0,73m2
20" (20/30) 508 70 1,46m2
30" (30/30) 762 70 2,19m2
40" (40/30) 1016 70 2,92m2

Membrane filter

A membrane filter is made from polymeric plastic film -typically polypropylene – These filters have a smaller filtration capacity, but here is the guarantee almost 100% retention grade and is available in different filtration grades. 0,1µm, 0,2µm and 0,45µm.

Type PTFE PTFE Junior  
Material  ePFTE ePFTE
Filtration rates

0,02 µm

0,45 µm

0,2 µm
Applications
 Sterile process gases •*
 Sterile vents
 Fine chemicals and solvents •*  
 Photoresists and developers •*  
 Pure water supply systems    
Biotechnology     
 Powder handling and tabletting    

For critical applications in sterile filtration, use of a hydrophobic PTFE membrane is recommended, especially in applications such as pharmaceutical industry and biotechnology. PTFE membranes are also well suited for sterile steam applications.

PTFE Series cartridges are manufactured using a highly hydrophobic ePTFE membrane. The enhanced ePTFE membrane offers exceptionally high gas flow rates at low pressure differentials (see graph). PTFE Series cartridges are recommended for sterile gas filtration and venting applications. The hydrophobic characteristics of the ePTFE membrane makes the PTFE Series filter cartridge particularly suitable for wet gas sterilising applications, such as fermenter air feed.

For solvent and aggressive chemical filtration applications, PTFE Series cartridges offer a wide range of chemical compatibility with high thermal stability. Suitable for the most demanding microfiltration applications, the cartridges can be used for the filtration of aggressive chemical solutions including acids, alkalis, solvents and etchants.