Povair - Microfil
Porvair Microfil cartridges provide absolute filtration where reproducibility and consistency of performance is critical. Suitable for the filtration of aqueous and organic liquids can Porvair Microfil cartridges to be used as pre-filters or final filters in the following applications:
Food and drinks
The clarification of beer, wine and spirits for a clear and bright finish, without affecting the taste. It is an ideal pre-filter to protect the membranes used for cold sterilization.
Process Water Systems
The filtration of process water system for the removal of general soiling and resin fines. The native zeta-potential of the glass fiber in aqueous solutions makes Porvair Microfil ideal filter to remove submicron particles.
Pharmaceutical and Bioprocessing
The excellent dirt holding capacity of Porvair Microfil makes it an ideal choice for pre-filtering of complex biological fluids (eg cell culture media).
Filtering high chemicals, including solvents, reagents, photographic emulsions, inks and paints.
The clarification of process water and intermediates for the finished product.
|9¾", 9?", 10"
Features and benefits:
Porvair Microfil cartridges
The selection of the latest and most advanced glass fiber media has resulted in a robust filter cartridge with high dirt holding capacity and excellent chemical compatibility.
High filtration area
Porvair Microfil cartridges have a large surface area for low clean pressure drop.
Porvair Microfil cartridges are validated with the industry standerten OSU-F2 single pass test for Beta 5000 (99.98% efficiency).
Porvair Microfil cartridges show a natural positive electrostatic charge when used in aqueous solutions. This results in improved removal of submicron particles, that is less than the designated micron rating.
Controlled production environment
Porvair Microfil cartridges are manufactured in an ISO cleanroom environment by fully gowned staff, minimizing the risk of contamination.
Suitable for steam and hot water sanitisation
Porvair Microfil cartridges are resistant to repeated steam sterilization up to 130 ° C (266 ° F) and hot water cycles at 90 ° C (194 ° F).
Gaskets and O-rings
Ethylene propylene, PTFE encapsulated, silicone, nitrile or polypropylene felt.