|
The aftercoolers in the AfterCooler AIR series use ambient air to cool the outlet compressed air from the compressor to a temperature of only 10°C higher than the ambient temperature. This cooling causes condensation of up to 80% of the moisture in the compressed air. The condensate is then gathered and discharged in the cyclone, installed at the aftercooler outlet.
The aftercoolers are made up from a heat exchanger with a finned coil, cooled by a high-efficiency axial fan mounted on a galvanized and painted sheet structure.
Electrical power supply: 230V ± 10% / 1 phase / 50 Hz (AF007-013); 400V ± 10% / 3ph / 50 Hz (AF025-381).
Maximum working pressure: 16 bar (g) mod. AF007-201; 10 bar (g) mod. AF251-381.
Maximum temperature of compressed air input: 200 ° C
|
