Welcome to Ultrafilter webshop, log in or create new accountCustomer Center - Log out

DK NO SE EU

Adsorption dryer Heatless HL

 

Billede: 1719

Why drying compressed air? 

Compressed air is used in almost all areas of industrial manufacturing as a source of energy or processing.

Compressed air needs to be dry, oilfree and clean in order to prevent costly production downtimes and losses in the production quality. The atmospheric air drawn in contains harmful substances, dirt particles and moisture in the form of water vapour, which condenses in compressed air pipes and can lead to considerable damages (corrosion, freezing etc.).

 

Ultrafilter HeatLess HL adsorptionn dryers

As a complete system the HeatLess HL adsorption dryer has a prefilter (with automatic condensate drain), silencers and an integrated dust filter onboard providing maximum efficiency and operational safety. HeatLess HL adsorption dryer are produced for a wide range of applications and are delivered ready to connect and easy to install.

With 12 sizes for volume flows from 50 to 1000 m³/h and pressure dew points of -20 °C, -40 °C or -70°C customized solutions are offered. While matching perfectly to compressors requirements, no over-sizing is necessary. The demand for regeneration air remains constant.

 

 

 

HL 0100  incl. filter - 100 m3/h ( CDP -40)
HL 0100 incl. filter - 100 m3/h ( CDP -40)
Item no:593402
EUR 2.685,00EUR 2.685,00
Qty
 
HL 0375  incl. filter - 375 m3/h ( CDP -40)
HL 0375 incl. filter - 375 m3/h ( CDP -40)
Item no:593407
EUR 5.371,00EUR 5.371,00
Qty
 

Technical information

Here below can information for Ultrafitlers Heat Less Desiccant (HL) on the picture below is a table of Ultra Filter Heat Less Desiccant (HL) where it shows the physical size of adsorptionstørren iforhold to the large flow (m3 / h) the specific adsorption dryers can handle.

 

Size Volume Flow Connection Dimensions Weight
Heatless HL Vnom
m3/h
DIN
G"
Width
W (mm)
Depth
D (mm)
Height
H (mm)
kg
0050 50 580 380 1200 90
0080 80 580 380 1550 115
0100 100 G1 580 380 1480 145
0150 150 G1 800 450 1850 180
0175 175 G1 800 450 1700 240
0225 225 G1½ 800 480 1760 285
0300 300 G1½ 800 480 1720 370
0375 375 G1½ 1000 600 2020 430
0550 550 G2 1000 600 1960 520
0650 650 G2 1000 600 2000 680
0850 850 G2 1300 800 2200 770
1000 1000 G2½ 1300 800 2300 850
Volume Flow Vnom in m³/h related to 20 °C and 1 bar abs suction condition of compressor, 7 bar g operating pressure and 35 °C inlet temperature.

 

Use this formula to find the right size:

 

Billede: 1720

Veff = Inlet Flow Rate

K1 = Correction factor

 

Correction Factor Operating Pressure (bar g)            
K1 4 5 6 7 8 9 10 11 12 13 14 15 16
Inlet temp. (oC) 35 0,63 0,75 0,88 1,00 1,13 1,25 1,38 1,50 1,55 1,60 1,65 1,70 1,76
  40 0,55 0,66 0,77 0,88 0,99 1,10 1,21 1,32 1,43 1,54 1,65 1,70 1,76
  45 * 0,42 0,50 0,59 0,67 0,76 0,84 0,92 1,01 1,09 1,17 1,26 1,34 1,42
  50 ** 0,35 0,41 0,48 0,55 0,62 0,69 0,76 0,83 0,90 0,96 1,03 1,10 1,17

Volume Flow Vnom in m³/h related to 20 °C and 1 bar abs suction condition of compressor, 7 bar g operating pressure and 35 °C inlet temperature.

 

 

Compact design

Due to the compact design the new series of HL dryers are saving installation space and shipping costs. The symmetric design with the central position of the UPEC control system are service- and maintenance friendly. Service components are easy to maintain, because they are accessible from the front side of the dryer. Pre- and afterfilters are also installed in central position, easy to access from both side (no preferred flow direction). The modular system design allows to modify a HeatLess HL dryer to an OFA oif free air system or to an ALG air breathing system (seeoptions).

 

Qualiy product

Only the best components were used for the production of the ultralter high-efciency compressed air dryers. According to our quality safety program in appliance to DIN ISO 9001 these products are declared „quality product“. Together with the maintenance- and user-friendly construction, absolute operation safety and reliability is ensured, guaranteed by a 5-years-operation warranty. Therefore products of these performance are marked „Made in Germany“. All ultrafilter HeatLess HL adsorption dryers guarantee lowest possible total cost of ownership.